fbpx

M20

M78 Series Moorgen Smart
Tourbillon Dimming
Remote Control

Simple, robust
Clearly defined separation line design
Three-dimension, sense of technology
Bringing an ultimate visual impact

Still as a maiden
Swift as a startled rabbit

With a flick of the fingertip
the dynamic ambient light quickly flashes
On the upward-facing side
the text light instantly illuminates

Six-axis sensor

With each rotation, the built-in low-power six-axis accelerometer gyroscope
combination sensor accurately detects the direction of movement
Only the upward-facing side lights up with text and can be controlled

Five independently controllable surfaces

One magic cube can control all lights, all curtains,
all light strips, all decorative lights and all spotlights

Unique ingenuity, making the most out of limited space

On a 5x5cm surface, you can control upward,
downward, leftward, rightward, rotate left, rotate right, and double tap
It can achieve functions such as adjusting brightness,
temperature, synchronous lifting and lowering of curtains,
and cyclic opening and closing

Fine stepless dimming

Precise gesture recognition
Each swipe can be set to change the brightness
by 5%, 10%, or 20%
The dimming process remains as smooth and
gentle as a feather landing

Capacitive multi-touch technology

Using a grid area recognition, self-developed recognition algorithm,
it can accurately identify gesture directions
and has strong anti-interference error correction capability

Independent
computing chip

In order to support the five sides
of the magic cube
and to accurately recognize
transmissions quickly
We provide each side with
an 8-bit dedicated
independent computing chip

Multi-layer special process

The surface of the magic cube adopts IF anti-fingerprint process,
and all six sides use 5.5H high-hardness ultra-thin tempered glass
The third layer uses a very rare indium plating process,
which allows the magic cube to appear as a mirror when static,
and when in use, it shows bright and clear text in designated areas

Press the magic cube with the palm of your hand
On the upward-facing side

The ambient light will flash slowly
Entering cleaning mode

Cleaning mode

If you want to clean the surface
of the magic cube
simply place the magic cube on the table
press the upward-facing side
with the palm of your hand
to enter cleaning mode
once entered, the entire ambient light
will enter a slow flashing state
after cleaning is completed
repeat the same operation to
restore normal status

TYPE-C charging

Removable panel,
TYPE-C charging after opening
The magic cube remians breath
state while charging
After being fully charged,
it stays illuminated